untitled

 

[an error occurred while processing this directive]

untitled

Dropdown menu Menu Test

untitled




Dropdown menu Menu Test




Dropdown menu Menu Test Dropdown menu Menu Test Dropdown menu Menu Test Dropdown menu Menu Test Dropdown menu Menu Test
Dropdown menu Menu Test
Dropdown menu Menu Test Dropdown menu Menu Test
Dropdown menu Menu Test
Dropdown menu Menu Test
Dropdown menu Menu Test


untitled

 

[an error occurred while processing this directive]

Installation & Service Facts:
Weight the heaviest component of the lift is 80lbs -120lbs, allowing for a true one-man installation.
Installation since the track is cut prior to going out to the home, the installation can be accomplished easily in 3-6 hours. (Anyone telling you it takes less time is deceiving you and should not be trusted). This is done by providing several small, yet important features in the design:
- Track brackets on the wall side only.
- A trough extruded in the track for use as a conduit for the call control wires.
- Footswitch call controls (can be used as a wall mount if desired). These are mounted to the floor at each end of the track. No stripping or connecting of individual wires. Internal wires including the power cord are connected via modular plugs.
- By placing the hardware needed in the proper location prior to shipping, hardware packages are eliminated.
Flexibility the unit can be cut down in length, track can be swapped between units, or it can be reversed in the field without cutting any wires or using any additional components.
Serviceability the electrical components are easy to reach for testing when service is needed. Harnesses can be unplugged to perform voltage checks. The limit switches are larger and more durable than other lifts to assure long life.
Spare parts a large number of the components are off the shelf items available at OEM stores around the country. This allows for immediate access to parts needed if service is required.
*Summit Lifts designs their lifts to meet the stringent requirements of ASME A17.1, and ASME A18.1 when installed properly. Those wishing to acquire these products need to check with local authorities to assure local code compliance, installation requirements, and to determine if permits are required.

Capacity:
350 lbs. (one person)


Maximum travel
19 feet
Staircase Space Used:
-9 3/4 for track -13 3/4 for Unit in Folded Position
Brake:
Self-Locking Worm Gear
Top Extension & Seat Height:
3 for 17 seat height
6 for 19 seat height
9 for 21 seat height
Bottom seat height 24
Incline Limits:
30 to 45 degrees
Speed:
22 feet per minute
Drive System
3/16 dia. Aircraft Cable
Motor:
1/3 HP 120 VAC Reversible
Electrical Requirements:
110 VAC Grounded Outlet
UL and CUL Listed Components

untitled


Dropdown menu Menu Test


untitled

 


untitled

 

untitled

Simply J.D. & Co., LLC ©®

   

untitled

| Simply J.D. & Co., LLC ©® | Terms of Use & Service | Privacy Policy | Copyright© 2004 | All Right Reserved | Contact Us | Webmaster | Donate! | Spam! |